TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 106 of 1168
10-50. PIONEER TOOL STOWAGE TRAY MAINTENANCE
This task covers:
a. Disassembly
b.
Assembly
a. Disassembly
1.
Remove retainer (1) from pioneer tool stowage tray (14).
2.
Remove eight nuts (5), lockwashers (4), screws (2), four footman loops (3), and two strap
assemblies (6) from pioneer tool stowage tray (14). Discard lockwashers (4).
3.
Remove two nuts (11), lockwashers (10), and two bumpers (13) from tool stowage tray (14). Discard
lockwashers (10).
4.
Remove four nuts (9), lockwashers (8), capscrews (12), and two latches (7) from pioneer tool stowage
tray (14). Discard lockwashers (8).
b. Assembly
1.
Install two latches (7) on pioneer tool stowage tray (14) with four capscrews (12), lockwashers (8),
and nuts (9). Tighten nuts (9) to 16-30 lb-in. (2-3 N
•
m).
2.
Install two bumpers (13) on pioneer tool stowage tray (14) with lockwashers (10) and nuts (11).
3.
Install two strap assemblies (6) on pioneer tool stowage tray (14) with four footman loops (3), eight
screws (2), lockwashers (4), and nuts (5). Tighten nuts (5) to 16-30 lb-in. (2-3 N
•
m).
4.
Install retainer (1) on pioneer tool stowage tray (14).
NOTE
• The procedures for disassembly and assembly of pioneer tool
stowage trays for all vehicles are basically the same. The tray
for M1037 and M1042 has tension latches mounted on angle
brackets.
• Note position of straps for assembly.
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix G, Item 135)
Twelve lockwashers (Appendix G, Item 178)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Pioneer tool stowage tray removed
(TM 9-2320-280-10).
TM 9-2320-280-20-3
10-84
Change 2
Back to Top
