TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 110 of 1168
10-53. CARGO BULKHEAD REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove two capscrews (7), lockwashers (8), washers (9), and cargo bulkhead bracket (10) from
cargo floor (11). Discard lockwashers (8).
2.
Remove two nuts (1), lockwashers (2), washers (3), capscrews (5), and washers (3) from cargo
bulkhead (6) and “B” pillar (4). Discard lockwashers (2).
3.
Remove cargo bulkhead (6) from vehicle.
4.
Inspect anti-noise pads (12) for damage. Replace if damaged.
b. Installation
1.
Install cargo bulkhead (6) on cargo floor (11).
2.
Install cargo bulkhead (6) on “B” pillar (4) with two washers (3), capscrews (5), washers (3),
lockwashers (2), and nuts (1).
3.
Install cargo bulkhead bracket (10) on cargo floor (11) with two washers (9), lockwashers (8), and
capscrews (7). Tighten capscrews (7) to 65 lb-ft (88 N
•
m).
4.
Tighten nuts (1) to 15 lb-ft (20 N
•
m).
INITIAL SETUP:
Applicable Models
M998, M998A1, M1038, M1038A1, M1097,
M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four lockwashers (Appendix G, Item 152)
Manual References
TM 9-2320-280-24P
TM 9-2320-280-20-3
10-88
Change 2
1
2
3
4
3
5
6
7
8
9
11
~
10
Back to Top
