TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 1083 of 1168
TM 9-2320-280-20-3
D - 1 1 0
Change 1
Section II.
I L L U S T R ATED MANUFACTURING INSTRUCTIONS (Cont'd)
MATERIAL BLOCK
STOCK SIZE
DESCRIPTION
SPECIFICATION
0.125 IN. THICK
STRIP, METAL
ASTM-A569
0.188 IN. THICK
INSTRUCTIONS:
1. Cut piece of 0.188 in. steel sheet metal to make handle (2) as shown.
2. Cut two 0.125 in. pieces of sheet metal to make two jaws (1) as shown.
3. Weld two jaws (1) to handle (2).
4. Remove all burrs and sharp edges.
OPEN END WRENCHS
PART
CUT
MANUFACTURED
NO.
LENGTH
FROM NSN
(INCHES)
N/A
as shown
Figure D-116. Open End Wrench.
Back to Top
