TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 1074 of 1168

TM 9-2320-280-20-3

Change 1

D - 1 0 1

Section II.

I L L U S T R ATED MANUFACTURING INSTRUCTIONS (Cont'd)

INSTRUCTIONS:

1±

.

Connect wire marked 6 on plug connector to banded end of diode R1.

2±

.

Connect wire marked 14 on isolated resistor network to bandless end of diode R1.

3±

.

Connect wire marked 7 on plug connector and wire marked 14 on bussed resistor network to banded

end of diode R2.

4±

.

Connect wire marked 13 on plug connector to bandless end of diode R3.

5±

.

Connect wire marked 11 on isolated resistor network to bandless end of diode R2.

6±

.

Connect wire marked 8 on isolated resistor network bandless end of diode R3.

7. Connect wire marked 1 on isolated resistor network to black (-) wire marked 6 on LED on mini-box

top section.

8. Connect wire marked 4 on isolated resistor network to black (-) wire marked 7 on LED.

9. Connect wire marked 7 on isolated resistor network to black (-) wire marked 13 on LED.

Figure D-113. Test Module Assembly.