TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 289 of 1168

11-22. CARGO SHELL DOOR STRAP REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two assembled washer screws (3), footman loop (2), and strap (1) from cargo door (4).

Discard assembled washer screws (3).

2.

Remove locknut (5), washer (6),

capscrew (7), and strap (1) from left striker mounting plate (8).

Discard locknut (5).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038,

M1038A1, M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Locknut (Appendix G, Item 128)

Two assembled washer screws

(Appendix G, Item 279)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Rear end of cargo shell door raised

(TM 9-2320-280-10).

b. Installation

1.

Install strap (1) on left striker mounting plate (8) with capscrew (7), washer (6), and locknut (5).

Tighten locknut (5) to 25-30 lb-ft (34-41 N

•

m).

2.

Install strap (1) and footman loop (2) on cargo door (4) with two assembled washer screws (3).

FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).

TM 9-2320-280-20-3

11-40

Change 2

NOTE

To assist closing cargo shell door, a grab loop may be added. Refer

to appendix D, figure D-83.