TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 299 of 1168

TM 9-2320-280-20-3

Change 2

11-49

11-30.1.

“

B

”

PILLAR PADDING REPLACEMENT

INITIAL SETUP:

Applicable Models

M966, M1025, M1026, M1036, M1043,

M1044, M1045, M1046, M1121

Materials/Parts

Two locknuts (Appendix G, Item 122)

Manual References

TM 9-2320-280-24P

Equipment Condition

Remove rifle mounting clamp bracket (if equipped)

(para. 11-92).

This task covers:

a. Removal

b.

Installation

1.

Remove locknut (8), washer (7), capscrew (6), and washer (7) from padding (3) and “B” pillar (11).

Discard locknut (8).

2.

Remove locknut (10), washer (4), capscrew (5), and washer (4) from padding (3) and “B” pillar (11).

Discard locknut (10).

3.

Remove screw (1), washer (2), and padding (3) from“B” pillar (11).

4.

Remove edge trim (9) from “B” pillar (11).

a. Removal

1.

Install edge trim (9) on “B” pillar (11).

2.

Install padding (3) on “B” pillar (11) with washer (2) and screw (1).

3.

Secure padding (3) to “B” pillar (11) with washer (4), capscrew (5), washer (4), and locknut (10).

4.

Secure padding (3) to “B” pillar (11) with washer (7), capscrew (6), washer (7), and locknut (8).

b. Installation

FOLLOW-ON TASK: Install rifle mounting clamp bracket (if removed) (para. 11-92).