TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 828 of 1168

TM 9-2320-280-20-3

12-216

Change 2

12-140. REAR ANTENNA CABLES REPLACEMENT (Cont'd)

10.

Remove five screws (7), clamps (3), and two antenna cables (1) from underbody (2).

11.

Remove locknut (5), washer (4), capscrew (9), washer (4), and filler pipe clamp (8) from

underbody (2) and filler pipe (6). Discard locknut (5).

NOTE

Perform steps 12 through 15 for M966, M966A1, M1025,

M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1,

M1043A2, M1044, M1044A1, M1045, M1045A1, M1045A2,

M1046, and M1046A1 models only.

12.

Remove two plain-assembled nuts (10), screws (12), clamps (11), and antenna cables (1) from

wheelhouse (13). Discard plain-assembled nuts (10).

13.

Remove two assembled locknuts (18), capscrews (15), two antenna cables (1), grommet (17), and

retainer (16) from wheelhouse (13). Discard assembled locknuts (18).

14.

Disconnect two antenna cables (1) from antenna base (14) and remove antenna cables (1).

15.

Remove ten clamps (3) and two clamps (11) from antenna cables (1).