TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 830 of 1168

TM 9-2320-280-20-3

12-218

Change 2

12-140. REAR ANTENNA CABLES REPLACEMENT (Cont'd)

NOTE

Perform steps 9 through 12 for M966, M966A1, M1025, M1025A1,

M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2,

M1044, M1044A1, M1045, M1045A1, M1045A2, M1046, and

M1046A1 models only.

9.

Connect two antenna cables (4) to antenna base (1).

10.

Install grommet (5) and retainer (7) on antenna cables (4).

11.

Install two antenna cables (4), grommet (5), and retainer (7) on wheelhouse (6) with two

capscrews (2) and assembled locknuts (3).

12.

Install two antenna cables (4) on wheelhouse (6) with two clamps (9), screws (10), and plain-

assembled nuts (8).

13.

Install two antenna cables (4) on underbody (12) with clamp (11) and screw (23).

14.

Position clamp (20) over yellow locator tape (22) on two antenna cables (4) and install on

underbody (12) with screw (21).

15.

Secure two antenna cables (4) to underbody (12) with three clamps (16) and screws (15).

16.

Install clamp (17) on filler spout (19) and underbody (12) with washer (13), capscrew (18),

washer (13), and locknut (14).