TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 833 of 1168
12-141. FRONT RADIO RACK POWER CABLE REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove two tiedown straps (16) from power cable (9) and antenna cables (4). Discard tiedown
straps (16).
2.
Remove two plain-assembled nuts (8), screws (5) clamps (7), and power cable (9) from radio rack (1).
Discard plain-assembled nuts (8).
3.
Remove two capscrews (2) and washers (3) from radio rack (1) and “A” beam (6). Pull radio
rack (1) away from “A” beam (6).
NOTE
Perform step 3.1 for vehicles with new configuration.
3.1.
Remove two locknuts (29), washers (28), radio rack (1), capscrews (26), washers (27), and radio rack
upper brackets (30) from “A” beam (6). Discard locknuts (29).
4.
Remove engine access cover (para. 10-15).
5.
Remove two assembled locknuts (12) and capscrews (15) from clamp (14), retainer (11),
grommet (10), power cable (9), and body (13). Discard assembled locknuts (12).
6.
Remove nut (20), lockwasher (19), washer (18), and positive lead (17) from stud (25). Discard
lockwasher (19).
7.
Remove nut (21), lockwasher (22), and negative lead (23) from shunt (24). Discard lockwasher (22).
8.
Remove power cable (9).
INITIAL SETUP:
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M1037, M1042, M1097,
M1097A1, M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two plain-assembled nuts (Appendix G, Item 201)
Lockwasher (Appendix G, Item 165)
Two tiedown straps (Appendix G, Item 307)
Two locknuts (Appendix G, Item 78)
Lockwasher (Appendix G, Item 178)
Two assembled locknuts (Appendix G, Item 130)
Manual References
TM 9-2320-280-24P
Equipment Condition
Battery ground cable disconnected (para. 4-73).
TM 9-2320-280-20-3
Change 2
12-221
Back to Top
