TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 1129 of 1258

2 2 - 9 . 5 . RIGHT REAR FLOOR PANEL REPAIR (Co n

t ’ d)

TM 9-2320-280-34

2 2 -1 6 . 7 6

Change 1

1.

Cut two metal strips (1) from sheet metal, and mark two reference lines (2), centerline (3), and

directional arrow (4), and identify as metal strips C and D.

2.

Locate, mark, and drill twenty 0.187-in. diameter holes through metal strip C (1).

3.

Bend metal strip C (1) 1.50 in.

4.

Place metal strip D (1), on a suitable work surface, with arrow facing up and to the left.

5.

Locate, mark, and drill twenty 0.187-in. diameter holes through metal strip D (1).

6.

Bend metal strip D (1) 1.50 in.

c

. Metal Strips Fabrication