TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 1127 of 1258

2 2 - 9 . 5 . RIGHT REAR FLOOR PANEL REPAIR (Co n

t ’ d)

TM 9-2320-280-34

2 2 -1 6 . 7 4

Change 1

1.

Cut reinforcement strip (1) from sheet metal, and mark four reference lines (2), centerline (3), and

identify as A on reinforcement strip (1).

2.

Locate, mark, and drill twenty-one 0.187-in. diameter holes and a 0.750-in. diameter hole through

reinforcement strip A (1).

3.

Remove all burrs and round sharp edges of reinforcement strip A (1).

4.

Cut reinforcement strip (4) from sheet metal, and mark four reference lines (5) and centerline (6).

Identify reinforcement strip (1) as B.

5.

Locate, mark, and drill eighteen 0.187-in. diameter holes and a 0.500-in. diameter hole through

reinforcement strip B (4).

6.

Remove all burrs and round sharp edges of reinforcement strip B (4).

b

. R e i n f o rcement Strips Fabrication