TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 1130 of 1258

2 2 - 9 . 5 . RIGHT REAR FLOOR PANEL REPAIR (Co n

t ’ d)

TM 9-2320-280-34

Change 1

2 2 -1 6 . 7 7

7.

Cut metal strip (5) from sheet metal, and mark center line (6) and directional arrow (10). Identify

metal strip (5) as E.

8.

Place metal strip E (5) on a suitable work surface, with arrow facing up and left.

9.

Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip E (5).

10.

Cut two metal strips (7) from sheet metal, and mark center line (8), and directional arrow (9).

Identify metal strips (7) as F and G.

11.

Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip F (7).

12.

Locate, mark, and drill fourteen 0.187-in. diameter holes in metal strip G (7).