TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 153 of 1258

TM 9-2320-280-34

3 - 23.

ENGINE INSTALLATION (6.2L) (Cont ’d)

38.

Position modulator cable (41) through cable bracket (34) and install washer (35) and start fron

t

mounting nut (36).

CAUTION

Ensure cable is clear of exhaust system or other sources of

extreme heat to prevent damage to equipment.

NOTE

Do not tighten mounting nuts.

39.

Pull modulator control rod (37) to the rear until stop is engaged and hold in position.

40.

With modulator cable (41) in idle position (cable core is extended), adjust modulator mounting

nuts (36) and (40) until modulator control rod head (38) and spring clip (39) align.

41.

Tighten mounting nuts (36) and (40) and recheck alignment.

Readjust if alignment has changed.

42.

Pull modulator cable core (33) outward and connect spring clip (39) to modulator control rod

head (38).

43.

Check modulator cable (41) for ease and smoothness of operation and ensure cable returns to the

idle position.

3-91