TM-9-2320-280-34
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JANUARY 1996
TM-9-2320-280-34 - Page 281 of 1258
TM 9-2320-280-34
4-8.
FUEL INJECTION PUMP SHUTOFF SOLENOID MAINTENANCE
This task covers:
a.
Removal
c.
Installation
b.
Inspection
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Fuel injection pump cover removed (para. 4-7).
automotive (Appendix G, Item 1)
Manual References
Materials/Parts
TM 9-2320-280-20
Three lockwashers (Appendix E, Item 80)
TM 9-2815-237-34P
Locknut (Appendix E, Item 45)
Two fiber washers (Appendix E, Item 14)
Maintenance Level
Direct support
NOTE
Working area should be clean, well ventilated, and free from
blowing dirt and dust.
a.
Removal
1.
Remove terminal (5), washer (6), and shell (7) from stud (12).
2.
Remove nut (8), lockwasher (9), washer (10), and fiber washer (11) from stud (12). Discard
lockwasher (9) and fiber washer (11).
3.
Remove locknut (4), ground strap (3), lockwasher (2), nut (8), lockwasher (9), washer (10), and fiber
washer (11) from stud (14). Discard locknut (4), lockwashers (2) and (9), and fiber washer (11).
4.
Remove electrical shutoff solenoid (13) from cover (1).
b. Inspection
Inspect shell (7) for deterioration, cracks, or damage. Replace if cracked, deteriorated, or damaged.
c.
Installation
1.
Install electrical shutoff solenoid (13) in cover (1).
2.
Install fiber washer (11), washer (10), lockwasher (9), nut (8), lockwasher (2), ground strap (3), and
locknut (4) on stud (14).
3.
Install fiber washer (11), washer (10), lockwasher (9), and nut (8) on stud (12).
4.
Install shell (7), washer (6), and terminal (5) on stud (12).
4-16
Back to Top
