TM 9-2320-280-34
6-3.
60 AMPERE ALTERNATOR REPAIR (Cont ’d)
35.
Connect three stator leads (1) to three stator lead terminals (2).
36.
Solder three stator leads (1) to three stator terminals (2).
37.
Apply adhesive sealer on stator leads (1) and terminals (2).
38.
Install output plate cover (10) on end housing (9) with two screw and lockwasher assemblies (11).
39.
Install O-ring (8) on end cover (7).
40.
Connect four leads (3) to terminals (4) on regulator (5).
41.
Install end cover (7) on end housing (9) with six screws (6).
42.
Install access plug (12) on end housing (9).
6-18