TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 301 of 1258

TM 9-2320-280-34

6-3.

60 AMPERE ALTERNATOR REPAIR (Cont ’d)

18.

Install O-ring (4), negative rectifier leads (13), positive rectifier leads (9), leads (20), and output

plate (2) into end housing (5) with four screws (1).

19.

Apply silicone compound to negative rectifier plate (17).

Install negative rectifier plate (17) on end

housing (5) with two washers (16) and screws (15).

20.

Connect three negative rectifier leads (13) to three negative rectifier terminals (14).

CAUTION

Do not overheat rectifier leads when soldering to rectifier terminals.

Damage to rectifiers will result.

21.

Solder negative rectifier leads (13) to negative rectifier terminals (14).

22.

Apply silicone compound to insulator (6), positive rectifier plate (7), and install insulator (6) and

positive rectifier plate (7) on end housing (5) with three nylon washers (12), washers (11), and

screws (10).

23.

Connect six positive rectifier leads (9) to four positive rectifier terminals (8).

24.

Solder positive rectifier leads (9) to positive rectifier terminals (8).

25.

Apply insulating compound to seven rectifier terminals (8) and (14).

26.

Connect lead (18) to output plate stud (3) and install tie strap (19) on four leads (20).

6-14