TM 9-2320-280-34
6-3.
60 AMPERE ALTERNATOR REPAIR (Cont ’d)
14.
Remove strap (1) from four leads (2) and disconnect lead (20) from output plate stud (5).
Discard strap (1).
15.
Remove insulating compound from seven rectifier terminals (10) and (16).
16.
Unsolder and disconnect six positive rectifier leads (11) from four positive rectifier terminals (10).
17.
Remove three screws (12), washers (13), nylon washers (14), positive rectifier plate (9), and
insulator (8) from end housing (7).
18.
Unsolder and disconnect three negative rectifier leads (15) from negative rectifier
terminals (16).
19.
Remove three screws (17), washers (18), and negative rectifier plate (19) from end housing (7).
20.
Remove four screws (3), output plate (4), O-ring (6), positive rectifier leads (11), negative rectifier
leads (15), and leads (2) from end housing (7).
Discard O-ring (6).
21.
Scribe a locating mark (24) on intermediate housing (23), stator (22), and drive end housing (21).
6-6