10-4.
DISC BRAKE CALIPER REPAIR (Cont'd)
1.
Lubricate caliper bore (5) and seal (4) with brake fluid.
2.
Install seal (4) in groove of caliper bore (5).
3.
Lubricate piston (2) with brake fluid and install dust boot (3) on piston (2).
4.
Work piston (2) and dust boot (3) into caliper bore (5).
5.
Seat dust boot (3) in caliper (1).
6.
Install bleeder screw (6) in caliper (1) finger tight.
d. Assembly
CAUTION
______
Use Silicone Brake Fluid only, MIL-B-46176. Failure to use BFS
will cause damage to brake system.
NOT E
For general assembly instructions, refer to para. 2-16.
TM 9-2320-280-34
1 0 - 6
Change 1