TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 26 of 400
TM 9-2320-283-13&P
0001
0001-2
CORROSION PREVENTION AND CONTROL (CPC)
Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any
corrosion problem with this item be reported so that the problem can be corrected and improvements can be
made to prevent the problem in future items.
Corrosion specifically occurs with metals. It is an electrochemical process that causes the degradation of metals.
It is commonly caused by exposure to moisture, acids, bases, or salts. An example is the rusting of iron.
Corrosion damage in metals can be seen, depending on the metal, as tarnishing, pitting, fogging, surface residue,
and/or cracking.
Plastics, composites, and rubber can also degrade. Degradation is caused by thermal (heat), oxidation (oxygen),
solvation (solvents), or photolytic (light, typically UV) processes. The most common exposures are excessive
heat or light. Damage from these processes will appear as cracking, softening, swelling, and/or breaking.
SF 368, PQDR, should be submitted to the address specified in DA PAM 750-8, TAMMS Users Manual.
OZONE DEPLETING SUBSTANCES (ODS)
There are no Class 1 ODS used or associated with the installation and operation of the ABS for the M915A1
truck.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
Procedures for destruction of Army materiel to prevent enemy use can be found in TM 750-244-3, Procedures
for Destruction of Equipment to Prevent Enemy Use.
PREPARATION FOR STORAGE OR SHIPMENT
For preparation for shipment and limites storage, refer to WP 0013. Additional information can be found in
TM 746-10, General Packaging Instructions for Field Units.
LIST OF ABBREVIATIONS/ACRONYMS
Abbreviations and acronyms appearing in this TM are defined in the paragraph from where they first appear,
after which only the abbreviation or acronym is used. The following is a quick-reference list of all abbreviations
and acronyms and their corresponding word or compound term used in this TM.
AAL - Additional Authorization List
ABS - Anti-lock Brake System
AEPS - Army Electronic Product Support
AR - Army Regulation
ATC - Automatic Traction Control
BII - Basic Issue Item
CAGE - Commercial and Government Entity Code
cm - Centimeter
COEI - Component of End Item
CPC - Corrosion Prevention and Control
DA - Department of the Army
DA-PAM - Department of Army Pamphlet
DIA - Diameter
DOD - Department of Defense
ECU - Electronic Control Unit
HAP - Hazardous Air Pollutant
IAW - In Accordance With
MIR - Modified Individual Regulation
ODS - Ozone Depleting Substances
PMV - Pressure Modulator Valve
PQDR - Product Quality Deficiency Report
RPM - Revolutions Per Minute
SF - Standard Form
SVC - Service
TAMMS - The Army Maintenance Management
System
TM - Technical Manual
UV - Ultraviolet
WCA - Warranty Claim Action
WP - Work Package
END OF WORK PACKAGE
Back to Top
