TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 41 of 400
0005-1
TM 9-2320-283-13&P
0005
OPERATOR AND FIELD MAINTENANCE
OPERATION UNDER USUAL CONDITIONS
INITIAL SETUP:
References
TM 9-2320-283-10
AR 70-1
DA FORM 2404/5988-E
WP 0006
WP 0009
WP 0013
WP 0014
GENERAL
This work package provides instructions for operating the M915A1 tractor equipped with ABS under usual
conditions.
PREPARATION FOR USE
WARNING
Operator and passenger must wear seatbelts during operation. Ensure
seatbelts are adjusted for proper fit. Failure to comply may result in
injury or death to personnel. Seek medical attention in the event of an
injury.
This vehicle has been designed to operate safely and sufficiently within the limits specified in TM 9-2320-283-10
and in this TM. Operation beyond these limits is prohibited IAW AR 70-1 without written approval from TACOM
Life Cycle Management Command, ATTN: AMSTA-LM-LMPP, Warren, MI 48397-5000.
Operators must know how to use the controls and indicators before starting and driving tractor, and must be able
to use the features of the tractor in the safest and most efficient way to accomplish their mission.
Prior to operating the M915A1 tractor, operators must perform the following:
1.
Ensure Field Maintenance has performed the required maintenance interval service to the tractor; refer
to DA Form 2404/5988-E, Equipment Inspection and Maintenance Worksheet.
2.
Perform all operator/crew Before Operation PMCS as listed in WP 0013 and WP 0014.
3.
Review operating instructions prior to performing mission. Refer to operating procedures listed in this
work package and in WP 0006, Operation Under Unusual Conditions.
4.
If used, ensure chocks are removed from tractor and trailer wheels prior to operation.
5.
If trailer is connected to fifth wheel, ensure fifth wheel primary and secondary locks are engaged. Refer
to TM 9-2320-283-10. If trailer is connected to towing pintle, ensure pintle latch is closed and secured
with cotter pin. Refer to TM 9-2320-283-10.
END OF TASK
Back to Top
