TM 9-2320-283-20-2
Section XI.
BRAKE SYSTEM
3-155.
GENERAL.
This section provides procedures authorized at the organizational maintenance level to replace brake system components.
To find a specific procedure contained in this section, see the task summary below.
3-156.
TASK SUMMARY.
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE CONFIGURATIONS
PARAGRAPH
CONDITION DESCRIPTION
All.
(Refer to specific paragraph for this
information).
TEST EQUIPMENT
Gage, air pressure, 0-200 psi.
SPECIAL TOOLS
None.
MATERIALS/PARTS (P/N)
Grease, automotive and artillery
Item 7, Appendix C.
Rag, wiping
Item 22, Appendix C.
Solvent, drycleaning, SD-2
Item 29, Appendix C.
Seal, grease (2)
(52304) 79903.
Tape, thread sealing
Item 32, Appendix C.
Thread sealant, liquid
Item 33, Appendix C.
Grease, silicone, lubrication
Item 9, Appendix C.
Compound, thread locking
Item 10, Appendix C.
Solution, soap
Item 28, Appendix C.
Pin, cotter
(24617) 103395.
Tie, cable (as required)
(96906) MS 3367-7-9.
Pin, cotter
(24617) 103395.
Diaphragm
(50153) 1133M009 (Front axle);
(50153) 1126M009 (Rear axle).
Kit, seal
(78330) 1069.
Pin, cotter
(06853) 200981.
Pin, cotter
(06853) 210492.
Decal, locking positions, cab
controlled fifth wheel
(34623) 5995161 (if required).
Seal kit
(06853) 287053.
Dehydrate cartridge assembly
(06853) 286968.
Check valve repair kit
(06853) 287298.
3-908