TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 231 of 624
TM 9-2320-283-34-1
ELECTRICAL SYSTEM.
3-22.
STARTER MOTOR AND SOLENOID REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E.
ASSEMBLY.
NOTE
Coil and jumper assembly should be heated to approximately 300°F before placing in position in
field ring.
Application of heat makes coil and jumper flexible so that is can be drawn tightly
against field ring.
47.
Coil and jumper
a.
Immediately after heating,
Ensure mounting hole for
assembly (74) and
place in position inside
item (76) is alined.
four pieces (73).
item (15).
b.
Secure with eight items
Torque to 40-70 lb-in.
.
(75).
Tighten until there
is no space between items
(15) and (74).
c.
Apply one coat of varnish
Do not get any varnish
to item (74).
on four items (73).
48.
Bushing (59).
Install into item (15).
49.
Stud (76) and
a.
Assemble together.
insulator (78).
b.
From the inside of item
(15), insert into mounting
hole.
c.
Secure in place with item
(54) and one item (52).
50.
Jumper (72) and
Fasten to item (76), but do
nut (52).
not tighten.
3-178
Back to Top
