TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 239 of 624
TM 9-2320-283-34-1
3-22.
STARTER MOTOR AND SOLENOID REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E.
ASSEMBLY (Continued).
1.
Setscrew (48).
a.
Place in position on item
Item (48) should be new.
(11).
b.
Screw in until you feel it
on the inside of item
(11).
62.
Bushing (49).
Press into item (11) until
flush with housing.
NOTE
After installing new bushing, slide it over shaft
of armature assembly.
If it is
hard to slide on
and
off, ream it out until it slides on and off easily.
Be careful not to make it too loose as it acts
as a bearing
for the shaft to rotate on.
63. Screw (12) and
a.
Assemble together.
arm (33).
b.
Secure with item (32).
64.
O-ring (27).
Install on item (28).
Item (27) should be new.
65.
Arm (33), with
a.
Position inside housing of
Two items (34) are not
screw (12) and
item (11).
installed yet.
pin (32) attached.
b.
Secure with items (28),
Item (27) should be
(29), and (30).
attached to item (28).
66.
Boot (31).
Install into housing of item
(11) and feed threads of item
(12) through hole in center.
3-186
Back to Top
