TM 9-2320-283-34-1
3-22.
STARTER MOTOR AND SOLENOID REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E.
ASSEMBLY (Continued).
73.
Bushing (38).
Press into item (36) flush
with housing end.
NOTE
After installing new bushing, slide it over shaft
of armature assembly.
If it is hard
to slide on and off, ream it out until it slides on and off easily.
Be careful not to
make it too loose as it acts as a bearing for the shaft to rotate on.
74.
Wick (39) and
a.
Install item (39) into
six plugs (40).
mounting hole of item
(40).
b.
Add three to five drops
Use OE/HDO-30.
of oil into mounting hole
of item (40).
c.
Install item (40).
NOTE
Aline nose housing with housing assembly using location markers.
The location
markers were scribed or marked on their housings prior to disassembly.
75.
Housing (36) and
a.
Slide item (36) onto item
housing assembly
(25) and aline with item
(47).
(47).
b.
Secure with six items
Torque to 40-50 lb-in.
.
(37).
3-190