TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 233 of 624
TM 9-2320-283-34-1
ELECTRICAL SYSTEM.
3-22.
STARTER MOTOR AND SOLENOID REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E.
ASSEMBLY (Continued).
51.
Bushing (38).
Press into item (71) until
flush with housing.
NOTE
After installing new bushing sleeve, slide it over shaft of armature assembly.
If it is hard to slide
on and off, ream it out until it slides on and off easily.
Be careful not to make it too loose as it
acts as a bearing for the shaft to rotate on.
52.
Wick (39) and
a.
Install item (39) into
plug (69).
mounting hole.
b.
Add three to five drops of
Use OE/HDO-30.
oil into mounting hole of
item (69).
c.
Install item (69).
53.
Gasket (60), bush-
a.
Assemble together.
Item (60) should be new.
ing (59), washer
(56), and jumper
and screw assembly
b.
Press into item (71).
Jumper contact of item
(61).
(61) should be facing
the outside of item
(71).
54.
Bushing (59),
Install on item (61).
Torque item (52) to
washers (58),
40-70 lb-in.
.
(57), and (54),
two washers (56),
bar (55), washer
(54), and nut
(52).
55.
Lockwasher (53)
Install on item (61), but do
and nut (52).
not tighten.
3-180
Back to Top
