TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 235 of 624

TM 9-2320-283-34-1

ELECTRICAL SYSTEM.

3-22.

STARTER MOTOR AND SOLENOID REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

E.

ASSEMBLY (Continued).

NOTE

Plain washer is an insulator and made of fiber

material.

There should

be one of these washers

installed both above and

below each mounting

arm of each brush holder and spring assembly.

56.

Four bushings

Install on item (71).

(63), twelve

washers (62), four

holders (24), four

washer (64), four

lockwashers (65),

and four screws

(66).

NOTE

One contact of brush holder jumper attaches between the jumper and screw assembly and a

brush holder and spring assembly.

The second contact mounts to the brush holder and spring

assembly on the opposite side.

57.

Jumper (68).

a.

Position between item (61)

and two items (24).

b.

Secure in place with two

items (23) and four items

(22).

NOTE

Aline communtator end housing with field ring using location markers.

The location

markers

were

scribed

or marked on the housing prior to disassembly.

3-182