TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 342 of 570

TM 9-2320-283-34-2

SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.

3-103. EQUALIZER BEAM REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

7. New bushing (12).

Using items (10), (11), and

Make sure item (12) is

(4), press into item (6).

centered in item (6).

8. Beam (6).

Using hydraulic jack, raise

until items (6) and (12) are

against item (14).

9. Two caps (7), four

Install onto items (12).

nuts (9), and

(13), and (14).

washers (8).

10. Beam (6) and

frame (1).

Remove hydraulic jack and

jack stands.

11. Dual tires over

Remove.

Refer to TM 9-2320-283-

bushing being

10.

replaced.

12. End of axle

assembly (5).

Support with jack stand.

13. End of beam (6).

Support with hydraulic jack.

14. Nut (15),

Remove from two items (17).

washer (16), and

screw (19).

15. Two adapters (17)

Remove from items (5) and

Adjust hydraulic jack as

and sleeve (18).

(6).

needed to remove two

items (17) and item

(18).

3-898