TM 9-2320-283-34-2
SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.
3-104. FRONT SPRING REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
WARNING
To avoid injury when removing front
spring, make sure front of vehicle and
front axle are supported
by jack
stands with a minimum ten ton capa-
city.
Each front spring weighs approximately
To avoid injury, be very
careful when removing front spring.
NOTE
Right and left side front springs are
replaced in
the same way, except as
noted.
Use this procedure to replace
either front spring.
1. Two hoses (19).
Disconnect and move away from Do this step for left
item (9).
side only. Use suitable
container to catch
transmission oil.
2. Cooling system.
Drain.
Do this step for right
side only. Refer to TM
9-2320-283-10 for cool-
ing system draining
procedures.
3. Hose (12).
Disconnect and move away from Do this step for right
item (9).
side only.
Use suitable
container to catch any
remaining coolant.
3-904