TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 510 of 570

TM 9-2320-283-34-2

CAB AND BODY.

3-117. DRIVER'S SEAT REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

BASE ASSEMBLY

NOTE

l

If either flange bearing was removed,

do step 72; otherwise, go to step 73.

l

If either bumper was removed, do step

73; otherwise, go to step 74.

72. Two bearings (43).

Install in item (38), if

necessary.

73. Two bumpers (22).

Install in item (38), if

necessary.

NOTE

Move slide rail assembly as necessary

to access mounting hardware.

74. Eight washers

Place two items (47) each

(47).

over four holes in item (44).

75. Base assembly

a. Line up four holes in item In order to line up

(38)

(38) with four holes in

holes between item (38)

item (44) and (47).

and (47), you may have

to pinch item (46)

closed to Slide item

(45) to correct length.

b. Secure with four items

(37), (27), and (48).

76. Slide rail assem-

Check that latches on item

Adjust position of

bly (44).

(44) open and close together. latches by pinching item

(46) closed until item

(45) automatically

slides into position.

3-1066