TM 9-2320-283-34-2
CAB AND BODY.
3-117. DRIVER'S SEAT REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
CENTER SUPPORT ASSEMBLY
NOTE
If any fitting was removed; do step
84, otherwise go to step 85.
84. Four fittings
(15).
Install in four items (42),
if necessary.
85. Two studs (42).
Install in item (70).
86. Two washers (66)
and roller and
a. Install on two items (42).
bearing assemblies b. Secure with two items (39),
(67).
(40), and (41).
87. Center support
assembly (70).
a. Slide into two channels in
item (38).
b. Line up two center holes
in item (70) with two
center holes in item (62).
c. Place two items (42) in
two center holes in items
(70) and (62).
d. Secure with two items (39)
and (40).
88. Bar set (31).
a. Liberally lubricate with
suitable white grease.
89. Retainer (29).
b. Install in item (70).
a. Line up slot in item (29)
with item (31).
b. Install in item (70).
3-1070