TM 9-2320-283-34-2
CAB AND BODY.
3-117. DRIVER'S SEAT REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
OUTER LEVER ASSEMBLY
NOTE
l
If any flange bearing was removed; do
step 77, otherwise go to step 78.
l
If any fitting was removed; do step 78
or 79, otherwise go to step 80.
77. Four bearings
(63).
78. Fitting (64).
Install in item (62) if
necessary.
Install in item (62) if
necessary.
79. Two fittings
Install in two items (42) if
(15).
necessary.
80. Two pins (65).
Install in item (62).
81. Two washers (66)
a. Install on two items (65).
and roller and
bearing assemblies
b. Secure with two items
(67).
(41).
82. Outer lever assem-
bly (62).
Line up two rear holes in
item (62) with two rear holes
in item (38).
83. Two studs (42).
a. Install in item (38) and
(62).
b. Secure with two items
(39), (40), and (41).
3-1068