TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 520 of 570

TM 9-2320-283-34-2

CAB AND BODY.

3-117. DRIVER'S SEAT REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

SEAT CUSHION ASSEMBLY

104. Two inch-by-four

Place between torsion bar

Block should be no more

inch wood block.

housing on item (70) and

item (38) at rear of item

than 3-inches high to

(1).

allow item (1) to drop

l-inch so that item (18)

may be installed.

NOTE

If bumpers were removed; do step 105,

otherwise go to step 106.

105. Two bumpers (22).

Install in channel on item

(20) if necessary.

106. Six clips (21).

Install on item (20).

107. Seat cushion

a. Install on item (20).

cover assembly

(19).

b. Secure with six items (21).

108. Seat cushion

assembly (18).

a. Slide on two items (60).

b. Lower studs in item (18)

into holes in item (17)

and (28).

c. Measure distance between

Assistant helps adjust

item (17) and (28) at both item (17) and (28) in

front and rear ends.

order to maintain

Distance between item

20-inch measurement.

(17) and (28) should be

20-inches. (See

illustration).

d. Secure with four items

(37), (27), and (36).

Assistant holds items

(17) and (28) in order

to maintain 20-inch

measurement when

securing item (18).

3-1076