TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 881 of 1320

Change 3

TM 9-2320-304-14&P

5-129

Direct Support and General Support Maintenance (Cont)

WARNING

Compression frame weighs 800 lbs. (363

kg). Attach suitable lifting device prior to

removal to prevent possible injury to

personnel.

NOTE

Left and right side screws are removed the

same way. Left side shown.

(3)

Attach lifting device to compression

frame (5).

NOTE

Some trucks may have three flat washers

installed on front screws for proper

clearance.

(4)

Remove three front screws (8), six or

nine washers (9), 24 spring washers

(10), and three locknuts (11) from

compression frame (5) and truck.

Discard spring washers and locknuts.

(5)

Remove three rear locknuts (12) and

screws (13) from compression frame (5)

and truck. Discard locknuts.

(6)

Repeat Steps

(4)

and

(5)

for right side.

(7)

Using lifting device, lift compression

frame (5) off truck.

(8)

Remove eight compression frame

spacers (14).

(9)

Remove lifting device from compression

frame (5).

b. Disassembly.

NOTE

Left and right side clamps are removed the

same way. Left side shown.

(1)

Remove eight screws (1) and

lockwashers (2), sixteen washers (3),

four cover plates (4), and eight tube

clamp halves (5) from left side

compression frame tube (6). Discard

lockwashers.