TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 882 of 1320

TM 9-2320-304-14&P

5-130

Direct Support and General Support Maintenance (Cont)

5-26. COMPRESSION FRAME REPAIR (CONT).

NOTE

•

Tag and mark all hoses prior to

removal.

•

Left side and right side procedures

are the same. Left side is shown.

•

Cap and plug all hoses and tubes

after removal.

•

Disconnect hoses 2588, 2888, and

2889 on the right side.

(2)

Disconnect hoses 2887 (7), 2666 (8), and

2890 (9) from three adapters (10) at

front of compression frame (11).

(3)

Remove three nuts (12),

lockwashers (13), and adapters (10) from

compression frame (11). Discard

lockwashers.

(4)

Remove three screws (14),

lockwashers (15), and washers (16) from

diverter manifold (17). Discard

lockwashers.

(5)

Remove two nuts (18) and compression

frame tubes (6) from diverter

manifold (17).

(6)

Remove two fittings (19) and preformed

packings (20) from diverter

manifold (17). Discard preformed

packings.

(7)

Remove two preformed packings (21),

spacers (22), compression rings (23), and

nuts (18) from compression frame

tubes (6). Discard preformed packings.