TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 890 of 1320

Change 2

TM 9-2320-304-14&P

5-138

Direct Support and General Support Maintenance (Cont)

5-27.

LOAD HANDLING SYSTEM (LHS) MOUNTING BRACKET REPLACEMENT

(CONT).

a. Rear Mounting Bracket Removal.

NOTE

Left and right frame mounting brackets are removed the same way.

Remove seven locknuts (1), four 4.00 in. (102 mm) screws (2), three 3.75 in. (95 mm) screws (3),

seven washers (4), spacers (5), and rear compression frame mounting bracket (6) from

frame (7). Discard locknuts.

b. Rear Mounting Bracket Installation.

NOTE

Left and right frame mounting brackets are installed the same way.

(1)

Install rear compression frame mounting bracket (6) on frame (7) with four 4.00 in. (102 mm)

screws (2), three 3.75 in. (95 mm) screws (3), seven washers (4), spacers (5), and new locknuts

(1).

(2)

Tighten locknuts to 210 lb-ft (285 N

S

m).