TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 898 of 1320

TM 9-2320-304-14&P

5-142.2

Organizational Maintenance Instructions (Cont)

5-28.1 CONTAINER HANDLING UNIT (CHU) SLIDER ARM ASSEMBLY REPAIR (CONT).

a. Removal.

WARNING

Arm assembly weighs 240 lbs. (109 kg). Attach suitable lifting device to prevent possible

injury to personnel.

NOTE

There are two arm assemblies. Both are removed the same way. Right side is shown.

(1)

Attach lifting device to arm assembly (1).

NOTE

Note quantity of shims prior to removal.

(2)

Remove retaining ring (2), pivot pin (3), and shim(s) (4) from rear roller bracket (5) and arm

assembly (1).

(3)

Soldier A and Soldier B remove arm assembly (1) from rear roller bracket (5).

(4)

Position arm assembly (1) on clean work surface and remove lifting device.

b. Disassembly.

(1)

Remove seal (1), thrust washer (2), and

preformed packing (3) from large end of

arm assembly (4). Discard seal and

preformed packing.

Change 1