TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 892 of 1320

Change 2

TM 9-2320-304-14&P

5-140

Direct Support and General Support Maintenance (Cont)

5-27.

LOAD HANDLING SYSTEM (LHS) MOUNTING BRACKET REPLACEMENT

(CONT).

e. Right Front Compression Frame Mounting Bracket Removal.

(1)

Remove three locknuts (1), 4.00 in. (102 mm) screws (2), washers (3), and spacers (4). Discard

locknuts.

(2)

Remove three locknuts (5), 3.75 in. (95 mm) screws (6), washers (7), spacers (8), and right front

compression frame mounting bracket (9) from frame (10). Discard locknuts.

f. Right Front Compression Frame Mounting Bracket Installation.

(1)

Install right front compression frame mounting bracket (9) to frame (10) with three 4.00 in.

(102 mm) screws (2), washers (3), spacers (4), and new locknuts (1).

(2)

Install three 3.75 in. (95 mm) screws (6), washers (7), spacers (8), and new locknuts (5).

(3)

Tighten locknuts (1) to 410 lb-ft (556 N

S

m).

(4)

Tighten locknuts (5) to 210 lb-ft (285 N

S

m).

g. Follow-on Maintenance.

(1)

Install compression frame (

Para 5-26

).

(2)

Install left fuel tank (for front left bracket only) (TM 9-2320-279-20-1).

(3)

Remove wheel chocks (TM 9-2320-279-10).

END OF TASK