TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 884 of 1320

TM 9-2320-304-14&P

5-132

Direct Support and General Support Maintenance (Cont)

5-26. COMPRESSION FRAME REPAIR (CONT).

c. Assembly.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

(1)

Coat threads of three rubber

bumpers (1) with sealing compound.

(2)

Install three rubber bumpers (1) in

compression frame (2).

(3)

Install locknut (3) on rubber bumper (1).

(4)

Install bulkhead union (4) with nut (5)

in compression frame (2).

CAUTION

Ensure correct preformed packing is

installed on fitting or damage to packing

will result.

(5)

Apply hydraulic oil to preformed

packing (6).

(6)

Install nut (7), compression ring (8),

spacer (9), and preformed packing (6) on

left side compression frame tube (10).

(7)

Install left side compression frame

tube (10) in bulkhead union (4) and slide

preformed packing (6) with spacer (9)

and compression ring (8) into bulkhead

union (4).

(8)

Install nut (7) on bulkhead union (4).