TM-9-2320-304-14-P
LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2000
TM-9-2320-304-14-P - Page 987 of 1320
TM 9-2320-304-14&P
5-227
Direct Support and General Support Maintenance (Cont)
a. Installation.
WARNING
•
Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles,
face shield, and gloves; use only in a well-ventilated area; avoid contact with skin,
eyes, and clothes; and do not breathe vapors. keep away from heat or flame. Never
smoke when using solvent. The flashpoint for Type III Drycleaning Solvent is 200
_
F
(93
_
C). Failure to do so may result in injury or death to personnel.
•
If personnel becomes dizzy while using cleaning solvent, immediately get fresh air
and medical help. If solvent contacts skin or clothes, flush with cold water. If solvent
contacts eyes, immediately flush eyes with water and get immediate medical
attention.
CAUTION
Do not discard any removed parts until CHU installation is complete. Some parts will be
reused.
NOTE
•
Container Handling Unit (CHU) can only be installed on HEMTT M1120.
•
Prior to installation, remove all banding and screws that were supporting CHU
components during packaging and shipping.
•
Remove all tags and protective coverings from components.
•
Clean bare metal surfaces with drycleaning solvent prior to installation.
•
It may be necessary to unpack boxes to locate required box.
Change 1
Back to Top
