TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1023 of 1318

TM 9-2320-328-13&P-1

0089-35

DRAFT

0089

Change 1

.

HWT0781

.

Step 51.

Cut wire 1592 (gray/white) at CHECK FOR OPEN COMPARTMENT WHEN LIGHT IS

ON indicator butt splice connector.

With rear compartment doors open, check for less

than 10 K ohms resistance between wire 1592 (gray/white) at cab instrument panel wire

harness CHECK FOR OPEN COMPARTMENT DOOR WHEN LIGHT IS ON indicator

butt splice connector termination and a known good ground.

.

If there is greater than 10 K ohms resistance, go to Step 53.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION