TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1027 of 1318

TM 9-2320-328-13&P-1

0089-39

DRAFT

0089

Change 1

.

HWT0783

.

Step 56.

Remove skid plate grille (WP 0349). Disconnect main wire harness main 1 connector.

With rear compartment doors open and with a lead test set, check for continuity

between wire 1609 (gray) at main wire harness main 1 connector, terminal 5 and a

known good ground.

.

a.

If there is continuity, repair wire 1609 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

.

b.

If there is no continuity, repair wire 1609 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION