TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1035 of 1318

TM 9-2320-328-13&P-1

0090-3

DRAFT

0090

HWT0690

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 2.

Put pump operator’s panel FOAM FLUSH switch to OFF position (WP 0004).

Pull

battery disconnect switch to off position (WP 0007).

Remove lamp from pump

operator’s panel FOAM FLUSH indicator (WP 0214).

Check for continuity across lamp.

If there is no continuity, replace lamp (WP 0214).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION