TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1065 of 1318

TM 9-2320-328-13&P-1

0096-5

DRAFT

0096

Change 1

END OF TASK

.

HWT0608

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 8.

Remove skid plate grille (WP 0349).

Pull battery disconnect switch to off position

(WP 0007).

Disconnect main wire harness main 1 connector.

With a test lead set,

check for continuity across main wire harness wire 2700 (red) from main 1 connector,

terminal 3 to PTO pressure switch connector, terminal A.

.

a.

If there is continuity, repair wire 2700 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

.

b.

If there is no continuity, repair wire 2700 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION