TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1055 of 1318

TM 9-2320-328-13&P-1

0094-3/(4 blank)

DRAFT

0094

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install cab instrument panel B (WP 0205)

2.

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT0750

Step 3.

Check for continuity across cab pump control wire harness wire 1023 (black) from

PUMP COOLER indicator terminal connector to a known good ground.

If there is no continuity, repair wire 1023 in cab pump control wire harness if

repairable (TM 9-2320-325-14&P), or replace cab pump control wire

harness (WP 0281).

Step 4.

Disconnect jumperwire 2768 (white) from PUMP COOLER indicator terminals.

Check

for continuity across jumperwire 2768 (white) from terminal to terminal.

a.

If there is continuity, replace cab PUMP COOLER indicator (WP 0198).

b.

If there is no continuity, repair or replace jumperwire 2768

(TM 9-2320-325-14&P).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION