TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1045 of 1318

TM 9-2320-328-13&P-1

0092-3

DRAFT

0092

HWT0706

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 3.

Install lamp in pump operator’s panel FOAM SYSTEM indicator (WP 0214).

Open

pump operator’s panel (WP 0207).

Check for continuity across pump operator’s panel

wire harness wire 3895 (black) from pump operator’s panel wire harness FOAM

SYSTEM indicator terminal to a known good ground.

If there is no continuity, repair wire 3895 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump operator’s

panel wire harness (WP 0303).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION