TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1047 of 1318

TM 9-2320-328-13&P-1

0093-1

DRAFT

0093

FIELD LEVEL MAINTENANCE

HOSE REEL DISCHARGE VALVE INDICATOR DOES NOT ILLUMINATE (PUMP OPERATOR'S PANEL)

INITIAL SETUP:

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

HOSE REEL DISCHARGE VALVE INDICATOR DOES NOT ILLUMINATE (PUMP OPERATOR'S PANEL)

NOTE

•

Ensure system air pressure is at least 85 psi (586 kPa) when operating hose reel

discharge valve during this procedure.

System air pressure is required to activate valves.

•

Do not engage PUMP PTO during this procedure.

Valve operation can be checked

without water pump operation.

•

Valve operations can be checked by observing valve shaft rotation.

Valves are open when

tabs or yellow paint tabs are aligned with direction of fluid flow.

•

Step 1 will ensure that hose reel discharge system is operating properly or if fault exists in

bulb, indicator, or wires leading to indicator.

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

TM 9-2320-325-14&P

WP 0004

WP 0007

WP 0067

References (continued)

WP 0207

WP 0213

WP 0214

WP 0303

WP 0339

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)