TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1051 of 1318

TM 9-2320-328-13&P-1

0093-5/(6 blank)

DRAFT

0093

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT0738

Step 4.

Push battery disconnect switch to on position (WP 0007).

Put pump operator’s panel

REEL DISCHARGE switch to OPEN position (WP 0004).

Check for 22 to 28 VDC

between wire 4098 (green) at pump operator’s panel wire harness REEL DISCHARGE

indicator terminal and a known good ground.

a.

If 22 to 28 VDC are present, replace REEL DISCHARGE

indicator (WP 0213).

b.

If 22 to 28 VDC are not present, repair wire 4098 in pump operator’s

panel wire harness if repairable (TM 9-2320-325-14&P), or replace

pump operator’s panel wire harness (WP 0303).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION