TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1129 of 1318

TM 9-2320-328-13&P-1

0103-13

DRAFT

0103

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3256

.

Step 19.

Install warning lights to original positions (WP 0231).

Put EMERG MASTER and F/R

LOWER WARNING switches to off position (WP 0004).

Turn Service Drive Lights Off

(TM 9-2320-422-10).

Pull battery disconnect switch to off position (WP 0007).

Remove

driver side rear lower warning light (WP 0231).

With a test lead set, check for continuity

across driver side body wire harness wire 2640 (black) from driver side body wire

harness warning light connector, terminal 1 to a known good ground.

.

If there is no continuity, go to Step 21.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION