TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1134 of 1318

TM 9-2320-328-13&P-1

0103-18

DRAFT

0103

Change 1

.

Step 26.

Put EMERG MASTER and F/R LOWER WARNING switches to off position (WP 0004).

Turn Service Drive Lights Off (TM 9-2320-422-10).

Remove a known operating warning

light.

Remove non-operating front lower warning light (WP 0231).

Replace

non-operating front lower warning light with operating warning light.

Turn Service Drive

Lights On (TM 9-2320-422-10).

Put EMERG MASTER and F/R LOWER WARNING

switch to on position (WP 0004).

Check if known operating warning light operates in

non-operating warning light position.

.

If known operating warning light operates in non-operating warning light

position, replace non-operating warning light (WP 0231).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3263

.

Step 27.

Put EMERG MASTER and F/R LOWER WARNING switches to off position (WP 0004).

Turn Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Remove non-operating front lower warning light (WP 0231).

With

a test lead set, check for continuity across main wire harness wire 1640 (black) from

warning light connector, terminal 1 to a known good ground.

.

a.

If there is continuity, repair wire 1611 in main wire harness if repairable

(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).

.

b.

If there is no continuity, repair wire 1640 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION