TM-9-2320-328-13-P-1
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3
MARCH 2009
TM-9-2320-328-13-P-1 - Page 1148 of 1318
TM 9-2320-328-13&P-1
0104-8
DRAFT
0104
Change 1
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheels chocked (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
.
HWT1694
.
Step 10.
With a test lead set, check for 22 to 28 VDC between main wire harness wire 1630
(green) at main wire harness overhead warning beacon assembly connector and a
known good ground.
.
a.
If 22 to 28 VDC are present, repair wire 1640 in main wire harness if
repairable
(TM 9-2320-325-14&P), or replace main wire
harness (WP 0292).
.
b.
If 22 to 28 VDC are not present, repair wire 1630 in main wire harness
if repairable
(TM 9-2320-325-14&P), or replace main wire
harness (WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
